China Vacuum cleaner Mini electric 12V DC motor gearbox 12V with Hot selling

Item Description

Vacuum cleaner Mini electrical 12V dc motor gearbox 12v

Principal Attributes:
1.16mm gearbox additionally 030&050 everlasting magnet DC motor
two.Modest measurement dc equipment motor with minimal velocity and massive torque
3.16mm equipment motor provide .05Nm torque and far more dependable
4.Suitable to modest diameter, reduced sound and massive torque application
five.Dc gear motors can match encoder,3ppr
6.Reduction ratio:3,10,17,20,35,63,86,one hundred fifteen,a hundred and fifty,250,360
House appliance, electric curtai, door lock, computerized tv rack, slot machine, forex acount equipment, business office autination, automatic doorway lock.
 

Motor design no. Rated voltage No-load speed No-load existing Rated velocity Rated torque Rated current Output electricity Stall torque Stall existing
VDC r/min mA r/min g.cm mA W g.cm A
TFF-050SH-13120 6. 12500 45 ten thousand 10 225 1.03 50 1.30
TFF-050SH-5710 twelve. 8000 thirty 5700 ten 110 .six 33 .29
TFF-050SH-08240 twelve. 12800 35 9500 ten one hundred fifty .ninety nine 43 .55

Equipment motor technical knowledge : GM16-050SH-13120-xxx

Reduction ratio 3 ten twenty 35 63 86 a hundred and fifteen a hundred and fifty 250 360
Length mm eleven eleven eleven 11 11 eleven eleven eleven 11 eleven
No-load pace rpm 4000 1200 600 340 190 one hundred forty one hundred and five 80 fifty 35
Rated pace rpm 3300 a thousand five hundred 285 158 116 ninety two 73 forty six 33
Rated torque kg.cm .571 .08 .fourteen .25 .44 .5 .5 .five .five .5
Max.momentary tolerance torque kg.cm .12 .4 .seven .eight 1.one one.nine two.six three. 3. three.

 Equipment motor technical information : GM16-050SH-5710xxx

Reduction ratio 3 ten twenty 35 sixty three 86 115 a hundred and fifty 250 360
Size mm 11 eleven eleven eleven 11 eleven 11 11 11 eleven
No-load pace rpm 2500 750 380 220 one hundred twenty   ninety sixty eight 52 32 22
Rated speed rpm 1900 570 285 one hundred sixty ninety sixty five 53 43 28 20
Rated torque kg.cm .571 .08 .14 .25 .forty four .five .5 .five .5 .5
Max.momentary tolerance torque kg.cm .twelve .four .7 .8 one.1 1.nine two.six three. 3. three.

Equipment motor complex data : GM16-050SH-08240-xxx

Reduction ratio 3 10 twenty 35 63 86 one hundred fifteen one hundred fifty 250 360
Length mm 11 eleven eleven eleven eleven eleven 11 eleven 11 eleven
No-load speed rpm 4100 1230 620 350 200   one hundred forty five a hundred and ten eighty five 50 36
Rated velocity rpm 3150 950 475 270 a hundred and fifty one hundred ten 82 73 46 33
Rated torque kg.cm .571 .08 .fourteen .25 .44 .five .5 .five .five .5
Max.momentary tolerance torque kg.cm .twelve .4 .7 .eight 1.one one.nine 2.6 three. 3. 3.

 

Application:
1.Accessory of automobile 
2.Paper feed
three.Broadly used  in automatic actuator,electric lock
four.Electricity Lock,Keep track of
5.Precision instrument
6.Mini mechanism,Robotic
7.Economic equipment,automobile DVD
8.Fiscal apparatus, Advertisement gear
 

Associated Items

Packing & Delivery
Packaging: single carton packing, one hundred parts for every box.
Shipping and delivery time:
DHL: 3-5 working days
UPS: 5-7 doing work times
TNT: 5-7 working days
FedEx: 7-9 operating times
EMS: 12-15 operating days
China Submit: Is dependent on ship to which nation
Sea: Depends on ship to which region
Our organization

TT Motor (HK) Industrial Co., Ltd. has been specializing in micro motors, gear motors and their respective parts since 2000.
Our products are widely used in entertainment systems, automobiles, home and industrial appliances and tools and many others. Our products are dependable and long-long lasting, and backed by years of experience. We export 98% of our output worldwide. 
By leveraging our hard-won reputation for honesty, dependability and quality, TT aims to continue as a pioneer in the sales overseas by seeking global partners. If your company is an end-user of micro-motors, a distributor or an agent, please contact us. We look forward to being able to work together with you in the near future
Certifications

FAQ
Q: How to purchase?
A: send us inquiry → get our quotation → negotiate particulars → confirm the sample → CZPT deal/deposit → mass generation → cargo prepared → harmony/shipping → more cooperation.
Q: How about Sample purchase?
A: Sample is offered for you. please speak to us for details. Once we demand you sample fee, make sure you truly feel simple, it would be refund when you spot official get.
Q: Which transport way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, China Post,Sea are obtainable.The other delivery methods are also accessible, remember to speak to us if you need to have ship by the other shipping and delivery way. 
Q: How lengthy is the produce?
A: Devliver time is dependent on the quantity you buy. usually it takes fifteen-twenty five operating days.
Q: My package has missing items. What can I do?
A: Make sure you get in touch with our assistance team and we will verify your order with the package contents.We apologize for any inconveniences. 
Q: How to affirm the payment?
A: We acknowledge payment by T/T, PayPal, the other payment approaches also could be approved,Remember to get in touch with us prior to you spend by the other payment ways. Also 30-50% deposit is accessible, the stability money should be compensated before shipping


/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial, Household Appliances, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Motor model no. Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r/min mA r/min g.cm mA W g.cm A
TFF-050SH-13120 6.0 12500 45 10000 10 225 1.03 50 1.30
TFF-050SH-07360 12.0 8000 30 5700 10 110 0.6 33 0.29
TFF-050SH-08240 12.0 12800 35 9500 10 150 0.99 43 0.55

###

Reduction ratio 3 10 20 35 63 86 115 150 250 360
Length mm 11 11 11 11 11 11 11 11 11 11
No-load speed rpm 4000 1200 600 340 190 140 105 80 50 35
Rated speed rpm 3300 1000 500 285 158 116 92 73 46 33
Rated torque kg.cm 0.024 0.08 0.14 0.25 0.44 0.5 0.5 0.5 0.5 0.5
Max.momentary tolerance torque kg.cm 0.12 0.4 0.7 0.8 1.1 1.9 2.6 3.0 3.0 3.0

###

Reduction ratio 3 10 20 35 63 86 115 150 250 360
Length mm 11 11 11 11 11 11 11 11 11 11
No-load speed rpm 2500 750 380 220 120   90 68 52 32 22
Rated speed rpm 1900 570 285 160 90 65 53 43 28 20
Rated torque kg.cm 0.024 0.08 0.14 0.25 0.44 0.5 0.5 0.5 0.5 0.5
Max.momentary tolerance torque kg.cm 0.12 0.4 0.7 0.8 1.1 1.9 2.6 3.0 3.0 3.0

###

Reduction ratio 3 10 20 35 63 86 115 150 250 360
Length mm 11 11 11 11 11 11 11 11 11 11
No-load speed rpm 4100 1230 620 350 200   145 110 85 50 36
Rated speed rpm 3150 950 475 270 150 110 82 73 46 33
Rated torque kg.cm 0.024 0.08 0.14 0.25 0.44 0.5 0.5 0.5 0.5 0.5
Max.momentary tolerance torque kg.cm 0.12 0.4 0.7 0.8 1.1 1.9 2.6 3.0 3.0 3.0

/ Piece
|
50 Pieces

(Min. Order)

###

Application: Industrial, Household Appliances, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Motor model no. Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r/min mA r/min g.cm mA W g.cm A
TFF-050SH-13120 6.0 12500 45 10000 10 225 1.03 50 1.30
TFF-050SH-07360 12.0 8000 30 5700 10 110 0.6 33 0.29
TFF-050SH-08240 12.0 12800 35 9500 10 150 0.99 43 0.55

###

Reduction ratio 3 10 20 35 63 86 115 150 250 360
Length mm 11 11 11 11 11 11 11 11 11 11
No-load speed rpm 4000 1200 600 340 190 140 105 80 50 35
Rated speed rpm 3300 1000 500 285 158 116 92 73 46 33
Rated torque kg.cm 0.024 0.08 0.14 0.25 0.44 0.5 0.5 0.5 0.5 0.5
Max.momentary tolerance torque kg.cm 0.12 0.4 0.7 0.8 1.1 1.9 2.6 3.0 3.0 3.0

###

Reduction ratio 3 10 20 35 63 86 115 150 250 360
Length mm 11 11 11 11 11 11 11 11 11 11
No-load speed rpm 2500 750 380 220 120   90 68 52 32 22
Rated speed rpm 1900 570 285 160 90 65 53 43 28 20
Rated torque kg.cm 0.024 0.08 0.14 0.25 0.44 0.5 0.5 0.5 0.5 0.5
Max.momentary tolerance torque kg.cm 0.12 0.4 0.7 0.8 1.1 1.9 2.6 3.0 3.0 3.0

###

Reduction ratio 3 10 20 35 63 86 115 150 250 360
Length mm 11 11 11 11 11 11 11 11 11 11
No-load speed rpm 4100 1230 620 350 200   145 110 85 50 36
Rated speed rpm 3150 950 475 270 150 110 82 73 46 33
Rated torque kg.cm 0.024 0.08 0.14 0.25 0.44 0.5 0.5 0.5 0.5 0.5
Max.momentary tolerance torque kg.cm 0.12 0.4 0.7 0.8 1.1 1.9 2.6 3.0 3.0 3.0

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
gearbox

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China Vacuum cleaner Mini electric 12V DC motor gearbox 12V     with Hot selling		China Vacuum cleaner Mini electric 12V DC motor gearbox 12V     with Hot selling
editor by CX 2023-03-31

Gear reducer

As one of the leading gear reducer manufacturers, suppliers, and exporters of mechanical products, We offer gear reducer and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of gear reducer .

Recent Posts